1. Clean and dry the area to be pasted with clean water.
2. Measure the approximate size of the sticker to be pasted, then draw it on the back of the sticker, and cut out the approximate shape in advance.
3. Tear off the back paper of the cut sticker, paste one side, that is, fix one end of the sticker, and then scrape it slowly from top to bottom with a scraper, while scraping and tearing the backing paper.
4. If there are creases during the construction process or there is an arc at the pasting position, use a baking gun to heat and stretch the sticker so that it will not wrinkle.
5. After pasting, use a knife to cut off the excess part, and the edge part should be stuffed in 3-5 mm, or the edge should be baked with a hair dryer to ensure that the edge is flat and firm, so as to avoid shrinkage or warping of the sticker over time.